UCP UCFC UCT UCPA UCFL UCF Series Distributors in Ahmedabad Gujarat Surat Vapi India

Generally P-Series pillow blocks are operational in industrial applications.
The most typical type ball bearing unit designed with reinforced rib in the center of the base for most favorable strength with least deformation.
The insert ball bearing unit combined the spherical outer surface of the bearing match the concave shaped in inside diameter of the housing which gives the unit unique self-aligning ability.

Four-bolt round flanged units are recommended for industrial applications where normal loads are applicable and this unit is the combination of ball barring, round flange with spigot joint on the mounting surface.
With the use of four bots and spigot joint provision the hosing can be fitted into the machinery mounting holes easily and its accurate mounting ensure the capability of heavy loads.

T-series take-up units are suitable and can be used for belt tightening and shaft adjustment devices, like conveyor applications.
It provides effectual supports for adjustable shafts and conveyer take-up pulleys.
Take up unit housing contains the ball bearing slide groove for unit and the housing.
These assembled units come with ready mounting position.
Bolt-hole distance and shaft center location are interchangeable with competitive units.
Diameter of the housing which gives the unit unique self-aligning ability.
These take-up units are pre lubricated, which can be easy to install on immediate necessity.

Suitable for limited space applications and mounting bolts are accessed from the bottom of the unit.
This one-piece housing with two tapped holes from bottom can be installed in any position and makes bearing replacement easily.
These pillow blocks are pre lubricated, which can be easy to install on immediate requirement.
Designed with grease nipple provision for re-lubrication.
Its special bonded seal design is appropriate for wet or dull environments.
Dimensions of base to bearing diameter center and mounting tappedholes are interchangeable with competitive units.

Two bolt Oval flanged units are recommended for industrial applications where normal loads are applicable.
Suitable for wall mounting surface, for example the side of machinery.
The flange unit can be fitted to machines with two-bolts.
Compact less weight housing, which requires lesser mounting space compare to square- flange units.
These assembled units come with ready mounting position, using two bolts through the flange.
Suitable for wall mounting surface, for example the side of machinery.
Bolt-hole distance and shaft center location are interchangeable with competitive units.
These flange units are pre lubricated, which can be easy to install on immediate necessity.